Flame Stop™
Fire Retardants for interior woods, exterior woods, and all types of fabrics
for use in office buildings, nursing homes, apartments, hotels, restaurants,
theatres, schools, churches, homes and all other areas where
fire retardants can save lives and property.
These Flame Stop™
Fire Retardants are pyrolytic formulations that prevent flame from spreading by
developing a chemically self-extinguishing reaction. These products have been
tested by United States Testing Company and Omega Point Labs in accordance with
the various UL, ASTM, UBC & NFPA standards. We have also passed the 25.853 &
23.853 tests with the FAA agency. Our Pick for most surface
applications, interior or exterior is FS I-DS for its
versatility and Class A Rating.
Flame Stop™ products are economical to apply because they only require 1 application incorporating low pressure spray equipment in comparison with most fire retardants that require 2 or 3 applications with high pressure equipment. Please remember Flame Stop™ Fire Retardant products are shipped ready to use with no additional mixing needed. Our products guarantee the highest quality fire suppression protection available in the fire retardant industry today. For further information about our retardant products please select one of the following products or call to discuss your application:
All of our flame retardants are non-toxic, non halogenated, contain no form of bromine; the do contain mold and mildew inhibitors which are effective against black mold. Fee free to call to review your application.
Flame Stop I™ is a universal fire retardant for most interior porous
cellulose applications. Its surfactants allow it to penetrate and become part of
the wood structure. Therefore, it provides the maximum wear and durability.
Suitable for indoor applications on burlap and other materials that contain a
minimum of 25% natural fiber.
Flame Stop I™ is useful on any absorptive interior wood surface. The material to
be treated can either be dipped or sprayed with low pressure equipment. The
surfactants included in the formulation allow as much as 3/8" penetration into a
Douglas fir stud. It can be used on framing, decorative woods, fabrics,
wallpaper and other cellulose products.
Click Here for Data Sheet in Adobe PDF. Coverage: Approximately
200 square feet per gallon. $42.50/gallon Call for volume requirements.
Flame Stop II™ has been formulated for outdoor applications. This
chemical contains polymers and surfactants that allow it not only to penetrate a
wood surface, but also create a watertight adhesion bond.
Flame Stop II™ contains additives that seals the active fire retardant
chemicals. FS II not only retards the material being treated, but adds
weather-resistance. Flame Stop II™ has a tendency to bring out the natural
beauty of the wood surface whether it be shingles or other exterior wood
products. The weather resistance is accomplished because after the product is
allowed to cure it becomes insoluble. Flame Stop II™ can also be applied to
various types of fabrics that are used for exterior purposes such as awnings,
stage decorations, costumes, etc. It also works very well on decor thatching,
wood stage props, hay barriers, hula skirts and any other porous cellulose
material. Tested by US Testing Co. No. (LA62466). Flame Stop II™ is a wood
preservative for Cedar Shake Shingles.
Click Here for Data Sheet in Adobe PDF
. $42.50/gallon Call for volume requirements. Call for volume
requirements.
Flame Stop III™ is one of the most unique fire retardants available on
the market today. It can be mixed with any latex paint or latex base stains. It
requires no seal coat or precoat as do most other fire retardant paint systems.
It has an indefinite shelf life as do most other systems and since it is not
premixed with the paint, it allows for an unlimited selection of colors and an
extensive choice of paint brands.
Just one application of Flame Stop III™ will provide a Class A fire rating. The
mixture is 16 ounces of Flame Stop III ™ (as it comes in the container) per 1
gallon of paint. Mix thoroughly and apply according to the instructions of the
paint manufacturer. In most cases, the mixture will become thicker than desired
and will require approximately 1-2 pint of water to be added, therefore, it can
be said that Flame Stop III is also useful as a paint extender. If Flame Stop
III has been stored in a cool area (less than 60 degrees Fahrenheit), it may be
necessary to pour hot tap water over the Flame Stop III™ container in order to
facilitate the mixing. Click
Here for Data Sheet in Adobe PDF. Call for volume requirements.
Flame Stop I-DS™ is a pyrolitic formulation that prevents the spread of
flame by developing a chemically self extinguishing reaction. Flame Stop I-DS™
is a clear penetrating chemical.
Flame Stop I-DS™ is recommended for use on various substrates such as thatching,
mulch, bamboo, foam rubber, open cell and closed cell foam rubber, nylon
netting, exterior composition siding and many other difficult to treat
materials. This product is a Class A rated fire retardant and can be used for
exterior or interior purposes at the rate of 200 square feet per gallon. This
is OUR PICK for most all applications. It can be applied by either dipping or spraying and can be
top coated with any latex paint system.
Click Here for Data Sheet in Adobe PDF. $42.50/gallon Call for volume
requirements.
Click Here for Material Safety Data Sheets in Adobe PDF.
